Busbar Safety Isolation for MV Switchgear
This device serves as an essential off-load safety disconnect within 10kV to 40.5kV medium-voltage switchgear. In indoor substations, industrial switchrooms, and containerized substations, this Indoor Disconnect Switch is wired in series between the busbar and circuit breaker. Once the breaker opens, the switch creates a visible, physically confirmed break in compliance with electrical safety rules, safeguarding personnel during cable termination, transformer testing, or routine cubicle cleaning.

High Rigidity Shaft and Earth Switch Interlock
The base frame is stamped and formed from heavy-gauge cold-rolled steel plate, providing structural rigidity that prevents binding over thousands of switching operations. The double-blade copper contact arms utilize electrodynamic attractive forces generated by short-circuit currents to increase contact clamping pressure, delivering reliable dynamic and thermal ratings. An integrated earth switch with mechanical interlocking prevents closing the earth switch when live or closing the main contacts onto an earthed circuit.

Product Specifications
|
Parameter |
Value |
|
Series |
GN Series |
|
Rated Voltage |
10kV, 24kV, 40.5kV |
|
Rated Current |
400A - 1250A |
|
Insulation Type |
Air Insulation |
|
Earthing Switch |
Standard Integrated Earth Switch |
|
Installation Location |
Indoor MV Switchgear Cubicles |
Precise Alignment for Standard Switchgear Assembly
With in-house CNC busbar bending and laser fabrication, we adapt operating rod lengths, pivot arm angles, and mechanism escutcheon plates to align with standard KYN, XGN, and custom switchgear enclosures, ensuring smooth front-panel mechanical operation.

Rigorous Factory Inspection and Export Packaging
Every Indoor Disconnect Switch is calibrated for blade contact alignment, loop resistance, and phase-to-phase dielectric withstand. Units are packed into heavy-duty reinforced cartons lined with protective cushioning and palletized on fumigated wooden platforms wrapped in protective stretch film.

FAQ
Q: Can terminal busbar hole patterns and angles be modified?
A: Yes. We can customize the primary copper busbar hole patterns, silver-plating thickness, and terminal bend angles to match specific switchgear schematics.
Q: How is damage during transit addressed?
A: Under FOB terms, transit risk transfers to the buyer once the cargo is loaded onto the vessel, and damage claims should be submitted to the carrier or insurer. The factory remains responsible for any damage resulting from internal packaging failures or manufacturing defects.
Hot Tags: indoor disconnect switch, China indoor disconnect switch manufacturers, suppliers, factory, high voltage disconnector, Hv Disconnect Switch, IEC standard high voltage DC disconnector, IEC standard high voltage disconnector, Isolating indoor high voltage disconnector, medium voltage knife disconnector




