Blog

Protection devices are measures used to protect circuits from damage. They typically include fuses, circuit breakers, overvoltage protectors, and so o

Load disconnect switches are widely used in power distribution and automation systems in construction, power, petrochemical, and other industries.

In the late 1990s, the construction of small-scale rural substations in my country required high-voltage fuses and load switches for protection.

The selection of fuses is mainly based on the protection characteristics of the load and the magnitude of the short-circuit current.

A fuse is connected in series in a power line. During normal operation, the buttoned fuse wire is mounted on the upper contact of the fuse tube and is

To ensure fuses function properly and guarantee the safe operation of all vehicle electrical components, selecting the appropriate type and specificat

Theoretically, no current should flow after an outdoor high-voltage disconnect switch is opened. However, safety operating procedures must still be fo

In high-voltage power systems, disconnect switches are critical equipment, but their function is quite specific. They cannot interrupt normal load cur

Commonly used high-voltage disconnect switches include GN19-10 and GN19-10C, with older, similar products including GN6-10 and GN8-10.

First, when operating a disconnecting switch, always check that the circuit breaker of the corresponding circuit is indeed in the open position to pre

During electrical equipment maintenance, a disconnecting switch provides an electrical isolation point with a clearly visible disconnection point to e

After opening the circuit breaker, a reliable insulation gap is established, separating the equipment or line requiring maintenance from the power sup